Advice

What Temperature to Set Air Conditioning: A UK Guide

Start at 24°C, then adjust for comfort. Learn how room conditions, sleep, shared offices and portable unit settings affect the right temperature.

Start at 24°C and adjust only if you need to

For most UK homes and ordinary offices, start by setting the air conditioning to 24°C. If the room still feels too warm once it has cooled towards that setting, try 23°C, then 22°C if needed. Treat 22–24°C as a practical starting range for comfort, not a compulsory standard or a health threshold.

The best setting is the highest temperature at which the people using the room feel comfortably cool. If 25°C or 26°C suits you, there is no reason to lower it simply to match a recommendation. Clothing, activity, sunlight and air movement all affect how a room feels.

Make changes one degree at a time rather than repeatedly turning the thermostat down. Give the room time to respond and check conditions where you actually sit or work. A suitable setting should keep you comfortable without leaving you cold, sitting in a strong draught or continually switching the unit off.

The display is a target, not a room-wide measurement

A setting of 24°C means you are asking the unit to control towards that temperature; it does not mean every part of the room is already at 24°C. Nor is it the temperature of the air leaving the outlet. Check the manual to see whether the display shows the target or the measured temperature.

The control sensor only measures conditions at its own location. A portable unit near a sunny window, an open doorway or its own cold airflow may sense something different from the conditions at your desk. Position the appliance according to its instructions and keep its air intake and outlet unobstructed.

Use a separate room thermometer if the display and your experience disagree. Put it near the occupied area, away from direct sun, electrical equipment and the cold air stream. Compare readings in consistent positions rather than moving it around until it produces the number you expected.

A lower target does not necessarily cool the room faster

Do not select 16°C simply to hurry a hot room towards 24°C. If the compressor is already delivering its available cooling, lowering the target cannot add capacity. It mainly tells the controls to keep calling for cooling to a lower temperature, potentially making the room colder than you wanted.

Start with cooling mode and your intended temperature, then choose an appropriate fan speed. A higher fan setting can help distribute cool air, although it may be noisier or create an uncomfortable draught. Automatic, dry and fan-only modes behave differently, so check which mode is active before changing the temperature.

You do not need to maintain a fixed numerical gap between outdoor and indoor temperatures. Outdoor heat affects how hard the equipment must work, but comfort indoors remains the useful test. If the room cannot reach your target, investigate incoming heat and the installation rather than continually reducing the setpoint.

In shared rooms, solve local discomfort before changing everything

Use 24°C as an initial shared-office setting, then check comfort across the occupied area rather than relying on the person nearest the controller. Someone beside sunlit glazing can feel hot while a colleague directly in the cold airflow feels chilly. One thermostat change may worsen that imbalance.

First consider shading the glazing, redirecting the outlet or adjusting where people sit. Keep airflow clear of furniture and avoid aiming a concentrated cold stream at one workstation. If using a separate fan to improve circulation, position it so that it does not disturb papers or create another uncomfortable draught.

Agree who can adjust the controls and record recurring problems by location and time of day. People doing physical work may need a different approach from seated office staff. Where heat remains a workplace concern, ask the responsible facilities or health and safety adviser to assess the conditions rather than treating a thermostat number as proof that everything is satisfactory.

At night, prioritise steady comfort rather than the lowest number

For an adult bedroom, start around 24°C and adjust according to comfort, bedding, airflow and noise. There is no single air-conditioning setting that guarantees good sleep. Avoid assuming that a colder room is automatically better, particularly if the outlet blows directly across the bed.

Cooling the bedroom before bedtime may let you use a less intrusive fan setting once you settle down. Check what the appliance’s sleep mode actually does: it may alter the target temperature or fan behaviour. A timer can stop operation later, but the room may warm again if heat continues entering.

Do not use a general comfort recommendation as medical advice for babies, older people or anyone with a health condition affecting temperature regulation. Follow relevant NHS guidance and individual clinical advice where appropriate. For a baby’s sleeping space, consult safer-sleep guidance rather than simply copying an adult’s preferred thermostat setting.

A practical sequence for finding the right setting

Prepare the room before judging the thermostat. For a portable air conditioner, check that the exhaust is connected to a suitable outdoor opening, the hose follows the manufacturer’s routing limits and gaps around the outlet are sealed as intended. Close unnecessary openings, shade direct sun and switch off heat-producing equipment you do not need.

Next, select cooling mode, set 24°C and note the temperature near the occupied position. Choose a fan speed that distributes air without causing discomfort. Keep a record of the starting conditions, including whether doors are opening frequently or sunlight is striking the room, so later comparisons are meaningful.

Once the room temperature is no longer falling noticeably, assess both the thermometer reading and comfort. If it is near 24°C but still too warm for you, reduce the target by one degree. If it remains well above the target, check the setup and heat load before asking for a lower temperature.

Reassess when conditions change rather than constantly adjusting the controls. An afternoon meeting, cooking or strong sun through glazing can alter the cooling demand. In a shared space, leave a brief note of the agreed setting and any operating instructions so the next person does not restart the process at the minimum temperature.

Know when the temperature setting is not the problem

A thermostat cannot compensate for an unsuitable installation or insufficient cooling capacity. An open-plan room, connected stairwell or frequently opened external door can expose the unit to more heat than the intended room alone. Setting a lower number does not turn that larger space into a manageable cooling area.

For portable equipment, inspect the exhaust hose for disconnection or damage, check accessible filters as instructed and look for warning indicators. Never exhaust hot air into the same room. If the appliance needs condensate drainage, follow its instructions; some units stop cooling when their collection tank requires attention.

ChillDash hires professional-grade portable units rated at 12,000–14,000 BTU, but that rating alone does not establish whether a particular room can reach your target. Ceiling height, glazing, occupancy and equipment heat also matter. Provide those details, together with the proposed exhaust route, when checking suitability and availability.

Cooling is not a substitute for ventilation. Most portable room air conditioners should not be assumed to provide the fresh air occupants need. In managed buildings, follow the ventilation arrangements and seek facilities advice if cooling conflicts with them. Do not obstruct required ventilation simply to make the thermometer reading fall.

Use the setting to maintain comfort, not chase a perfect number

Once you find a comfortable temperature, leave the controls to maintain it while the room is occupied. Continually alternating between the coldest setting and switching off makes the outcome harder to judge. Raise the target if the room feels unnecessarily cold rather than opening a window to counteract the cooling.

Lower targets generally demand more cooling, so avoid cooling further than people need. There is no reliable universal saving for each degree of adjustment: electricity use depends on the appliance, weather, room and operating time. Use timers or scheduling where suitable, while allowing for the room to warm during unoccupied periods.

For temporary hire, explain which rooms need cooling, when they are occupied and what temperature you hope to maintain. ChillDash delivers and collects portable units for homes and businesses nationwide. Suitability and delivery arrangements should be checked before planning around the equipment; the price is confirmed when availability is checked.

Common questions

Should I use Celsius or Fahrenheit on the controller?

Either works, but check the display before setting it. A target of 24°C is approximately 75°F; 22°C is approximately 72°F. Some remotes can switch units accidentally through a button combination, so consult the manual if the displayed numbers suddenly look unfamiliar.

Why does my air conditioner stop cooling before the whole room feels comfortable?

The sensor may have reached its target while another part of the room remains warmer. Some temperature variation during control cycles is also normal. Check airflow and compare temperatures near the unit and occupied area. If operation seems abnormal or a warning appears, consult the supplier.

Should the air conditioner be set differently in dry mode?

Dry mode is intended primarily for moisture removal, and its temperature controls vary by model. Some appliances restrict temperature or fan adjustments in this mode. If maintaining a chosen room temperature is your main aim, use cooling mode unless the manufacturer advises otherwise.

What setting should I use in a server or equipment room?

Do not use a household comfort setting as an equipment specification. Follow the equipment manufacturer’s environmental limits and obtain specialist advice on cooling capacity, airflow, monitoring and failure arrangements. Conditions at equipment air inlets matter more than how comfortable the room feels to a person.

Will the unit remember my temperature after a power cut?

That depends on the model’s restart function. Check whether it restores the previous mode and temperature, stays off or returns to a default. For an unattended room, confirm this behaviour with the supplier rather than assuming cooling will resume automatically.

Need air conditioning?

WHEN YOU NEED IT. WE'RE THERE.

Portable air conditioning delivered to your home or business.

Or send a full enquiry