Advice

Air conditioning for a holiday let: what genuinely works

Learn how to cool a static caravan or holiday let, choose suitable air conditioning, plan safe venting and power, and prepare clear guest instructions.

Cool the occupied rooms, not just the air by the window

To cool a static caravan or holiday let, keep direct sun out, ventilate when the outdoor air is cooler, and use properly vented air conditioning when those measures cannot keep occupied rooms comfortable. Prioritise the lounge or bedrooms rather than expecting one portable unit to cool an entire property through narrow passages and closed doors.

Static caravans can be particularly challenging because their roofs and walls are exposed, rooms are compact, and glazing can admit substantial sunshine. Insulation and construction vary considerably: do not assume that every caravan behaves alike, or that a holiday cottage with thick walls will stay cool after several warm days.

Start with the actual complaint. A hot lounge at lunchtime needs a different response from a bedroom that remains uncomfortable overnight. Record which rooms overheat, when they do so, and whether windows can safely remain open. This gives you a useful brief for choosing air conditioning for a holiday let.

Stop sunlight before it becomes heat indoors

Shade sun-facing glazing before the room becomes hot. Suitable external shading intercepts sunlight before it passes through the glass; closed internal blinds or curtains are a practical alternative where external alterations are unsuitable. Keep coverings clear of appliance vents and other required ventilation.

In a caravan, check more than the main lounge window. Glazed entrance doors, rooflights and smaller bedroom windows can admit sun at different times. Arrange shading around the property's exposure rather than leaving every blind open until guests arrive. A sunlit sofa or floor can continue warming the room after the sun moves away.

Do not attach improvised shades to the roof or fit reflective window film without checking suitability with the manufacturer or owner. External fittings must suit the structure, wind exposure and site rules. For a recurring problem, ask a competent installer to assess shading and insulation improvements rather than relying indefinitely on larger cooling equipment.

Use ventilation when it helps, and fans for people

Open windows for cooling when the outdoor air is cooler than the indoor air; otherwise, uncontrolled ventilation can bring more heat inside. Compare temperatures in shaded positions rather than judging by sunshine or a weather forecast. During air-conditioning operation, close ordinary windows and external doors apart from the properly sealed exhaust arrangement.

Where safe, opening windows on different sides can help flush out accumulated heat before guests settle in. However, ground-level security, rain, insects and noise may make overnight ventilation impractical. A holiday let needs a plan that works with its real opening restrictions, not one that depends on every window remaining open.

Fans can make occupants feel cooler through air movement, but they do not remove heat from a room. Position them where people sit or sleep, with stable bases and cables away from walkways. An evaporative cooler is not a substitute for refrigerated air conditioning: it adds moisture, and its usefulness depends on the surrounding conditions.

Choose capacity around the layout and heat load

Select a portable air conditioner for a defined room or connected zone, not simply the property's total floor area. Measure the space, note ceiling height, and describe the glazing, roof exposure and usual occupancy. Include cooking appliances and other significant heat sources when discussing suitability with the supplier.

ChillDash hires professional-grade portable units rated at 12,000–14,000 BTU, delivered and collected nationwide. That cooling-capacity range is not a promise of whole-caravan coverage. A shaded bedroom and a sun-facing open-plan kitchen-lounge can need very different treatment, even if their floor areas seem comparable.

Think about where the cooled air can travel. A unit in the lounge will not reliably cool bedrooms beyond a corridor, especially with doors shut for privacy. Separate sleeping rooms may need separate provision. Before choosing multiple units, confirm that there is space for each appliance, an exhaust route and sufficient electrical capacity.

Make the exhaust, electricity and water arrangements work

A portable refrigerant air conditioner needs a suitable route for exhausting heat outdoors. Confirm the hose dimensions, permitted arrangement and compatible window kit for the actual model. Caravan windows may be top-hinged or open outward, so a kit intended for a sliding window may not fit.

Keep the hose within the manufacturer's length and bend limits, and seal the opening around it without obstructing escape routes. Do not discharge into another room, an enclosed porch or beneath the caravan. Never cover permanent ventilation grilles. Where gas or other combustion appliances are present, obtain qualified advice about compatibility: some portable units extract room air and can affect airflow.

Check the unit's electrical input and starting requirements against the available supply, especially on a caravan pitch where several appliances may share limited capacity. Cooling capacity is not electrical consumption. Ask the supplier or an electrician about a suitable socket and connection rather than improvising with adapters or extension leads.

Confirm condensate arrangements too. Depending on the model and operating conditions, water may need collecting or draining. Establish whether drainage requires a particular fall or fitting, and keep any hose secure. Guests should never have to lift a heavy appliance or improvise drainage to keep it operating.

Run a complete pre-arrival cooling check

Test the full setup before guests arrive, with the property arranged as it will be occupied. First, measure the intended room and access route; check appliance dimensions, floor stability, socket position, exhaust access and required clearances. Ensure the unit and hose will not block a narrow bedroom doorway or circulation space.

Next, fit the approved exhaust arrangement, check drainage and inspect cables and plugs for damage. Follow the operating instructions and confirm that the controls are understood. Close unnecessary openings, apply the planned shading and run the equipment early enough to assess the room rather than just the temperature of the outlet air.

Finally, monitor room temperature away from direct sun and the cold-air stream. Check for warm air leaking around the window kit, water leakage, unusual noise or a fault indication. Record a simple handover note covering settings, drainage checks and whom guests should contact. Keep the unit's instructions accessible.

Avoid settings and positions that undermine cooling

Do not use the lowest temperature setting as a remedy for poor installation or excessive heat gain. Setting an unrealistically low target does not increase the unit's rated cooling capacity. If the room stays warm, investigate the exhaust seal, airflow, sunlight and room size before changing the setting again.

Small rooms can leave few sensible appliance positions. A portable unit contains a compressor and fan, so noise matters in a bedroom as well as physical fit. Check the supplier's sound information and available modes; do not assume a quieter mode maintains the same cooling output. Keep curtains, luggage and furniture away from air inlets and outlets.

Portable cooling may be unsuitable where there is no safe exhaust route, inadequate power or insufficient floor space. Repeated overheating across several occupied rooms may justify a professionally designed fixed system, subject to ownership and site permissions. Lowering guest occupancy or changing room use may be more workable than adding equipment that cannot be installed safely.

Make cooling manageable between bookings

Give guests a short, property-specific operating guide and make cooling checks part of every changeover. Explain which room the unit serves, how to select cooling mode, how to leave the exhaust in place and what to do if the appliance stops. Distinguish ordinary windows from permanent vents that must remain unobstructed.

Ask cleaners to inspect the window seal, hose connections, cable condition and any condensate container, and arrange filter cleaning as instructed by the manufacturer. Check that furniture has not been pushed against an inlet. A functioning unit can perform poorly after a guest moves it to make room for luggage.

For hire, confirm the dates, delivery access, installation responsibilities and collection arrangements when checking availability. The price is confirmed when availability is checked. For repeat seasonal use, compare the practical demands of temporary equipment with a fixed installation, including maintenance, storage, permissions and the rooms that genuinely need cooling.

Common questions

Can I advertise the whole holiday let as air-conditioned?

Describe the provision precisely. If a portable unit serves only the lounge, say so rather than implying that bedrooms are cooled. State any material limitations clearly in booking information, and avoid promising a particular indoor temperature that you cannot reliably maintain.

What access details should I give a hire supplier?

Mention steps, narrow gates, gravel paths, parking restrictions and the distance from unloading to the accommodation. Check door widths against the packaged or appliance dimensions supplied. Confirm who will receive the equipment and whether moving it into position is included.

Will air conditioning deal with damp while the property is empty?

Cooling may remove some airborne moisture, but it is not a complete damp-management strategy. Investigate leaks, condensation and ventilation first. Persistent damp or mould needs assessment of its cause; dedicated humidity control may be more appropriate than cooling an unoccupied property.

Can guests dry swimming towels beside the unit?

Keep towels off the appliance and clear of its airflow and electrics. Drying wet laundry indoors adds moisture that the cooling system may have to remove. Provide a suitable outdoor drying place or another designated arrangement where possible.

Should guests open windows when cooking with gas?

Follow the gas appliance's ventilation instructions, even when air conditioning is running. Cooling does not replace cooking ventilation, and permanent vents must remain open. Ask a suitably qualified gas engineer if you are unsure how the appliances can safely operate together.

Need air conditioning?

WHEN YOU NEED IT. WE'RE THERE.

Portable air conditioning delivered to your home or business.

Or send a full enquiry